35 to 50mm Internal Dial Bore gauge
QUICK OVERVIEW
Internal Dial Bore gauge with a 35 to 50mm measuring range
- Key Features
- The dial bore gauge offers - an accurate method of measuring a bore, or detecting a taper or ovality
- Calibration - The dial bore gauge must be calibrated to a known size and will indicate the deviation from that size by a maximum of 1mm
- A set of spacer rings and anvils are included with the bore gauge
- The anvils are used to set the measuring range to within 1mm of the desired bore to be measured or produced
- An outside micrometer, setting ring or slip gauges can be used to calibrate the bore gauge
- The bore gauge has a knurled locknut to secure the anvils and spacers
- There is a sprung loaded guide used to centralize the two measuring contact points to the bore
- At the opposite end of the gauge there is a heat insulating handle with a split collet and knurled locking ring to secure the dial indicator
- Included with the bore gauge - Probe body, Dial indicator, 6 Anvils, 2 Spacer rings, Wooden storage case and Instructions
- Measuring Range - 35 to 50mm
- Probe Length - 150mm
- Dial Diameter - 55mm
- Resolution - 0.01mm
| Despatch Time | Preorder |
| SKU | 5055396108699 |
| Part Number | ME-BG-35-50 |
| Brand | Machine DRO |
| MPN | ME-BG-35-50 |
| Type | Cylinder Bore Gauge |
| Measurement Units | Millimetre |
| Display Type | Dial |
| Range Group | 25-50mm / 1-2" |
| Resolution | 0.01mm |